1. RF uses 2.4G two-way wireless data transmission module.
2. Automatic frequency, strong anti-interference ability.
3.250K: wireless transmission rate, transmission speed is very fast.
4.20-100meter effective open distance, beyond the effective distance or data upload does not succeed will be short sound three tips.
5. Independent mechanical ID, so that each scanner has a unique identity, to ensure that the work of multiple sets of products at the same time do not cross talk.
6. Can be a custom user ID, to facilitate users to clearly distinguish between data sources.
7. Pairing is simple, a pair, long-term use, but also can be repeated pairing.
8. Simple and easy to use the inventory model, can store 500-10000 barcode information (more than 500 need to customize).
9. Auto sleep, the sleep current is less than 10uA, greatly extend the battery standby time.
10. Battery low voltage protection, the battery voltage to 3.5V, each boot or scan will keep a sound prompt charging.
11. Dedicated charging circuit to ensure charging safety.
Specification Data:
1.Light source type: visible laser diode, wavelength 650nm
2.Trigger mode: Manual (long press switch can be turned off)
3.Scan mode: single line scan
4.Scan speed: 100 ? 2 times/ second
5.Resolution: ?4mil
6.Printing contrast: 30% reflection difference(min).
7.Bit error rate: 1/5000 million
8.Charging input voltage: DC 5V ? 0.25 Volts
9.Power: 100 mW (work): 500 mW (instant maximum)
10.Current: 20 mA (work): 100 mA (instant maximum)
11.Standby current: < 20uA
12.Light intensity: 3000-12000Lux
13.Depth of focus: 5mm-630mm
14.Scan angle: rotation angle?60, dip angle?65, drift angle?42 degrees (right &left,front&back, rotation)
15.Lift way: buzzer, LED indicator light.
16.Receiving interface: 158mm(L)*68mm(W)*96mm(H)
17.Weight: 200g19.Material: ABS+PC