This 36.4MP FULL FRAME mapping camera Surveyor Max 36S is a best option of cost-effectively and high quality mapping camera in the market . it has:
- 36.3 megapixel full-frame CMOS sensor with no OLPF.
- E-mount with support for FE, E, and A-mount lenses (with adapter)
- Bionz X image processor.
- Built-in Multi-Interface hot shoe output for PPK
- top dynamic range and very low noise
- higher speed from parallel signal processing and faster signal conversion.
the full-frame sensor has more than 2.5 times the surface area of an APS-C sensor. which is very essential for a aerial mapping camera, compared with the APS-C senor camera with the same the same front&side overlap, the full 0frame sensor save over 35% flight time for the same map quality.
the 36MP Surveyor 36S is an interchangeable lens camera, and it is compatible with any of Sony E-mount Lens.
the Surveyor Surveyor Max 36S has two option, the ABS housing version has only body weight of 186g, (Aluminum housing version has 220 g body weight), we also have E-mount lightweight full frame lens, the latest version of the 35mm full frame F5.6 Mapping lens is 19g.
It has PPK Feed back from hotshoe function, so it can timestamp on PPK GNSS Modules such as Emlid Reach M2 each time capturing photo for accuracy mapping mission.
Specifications:
Sensor: 35mm full frame Exmor CMOS sensor(35.9x24mm)
Number of Pixels(effective): 36.4MP
Lens compatibility: E-mount lenses
Hot Shoe signal: supported
Shutter Trigger:High level/low level/PWM
Shutter Speed:30-1/8000sec
Continuous shooting: 4FPS
Storage Card Type: SD/SDHC/SDXC Card/MS
Storage: SD Card(maximum support 640G)
Parameter Setting: Button/USB
Data Reading: SD card/USB
Interface: HDMI USB2.0
Power: can be powered by 3-6S Lipo Battery
Size: 10x7x4cm
Weight: 220g
Image sensor aspect ratio: 3:2
Image Size (pixels):
3:2 L: 7360x4912(36M),M:4800x3200(15M),S:3680x2456(9.0M)
16:9 L: 7360x4144(30M),M:4800x2704(13M),S:3680x2072(7.6M)
