4.3Inch TFT LCD Car Rear View Monitor+CMOS Waterproof Reverse Camera
Item 1: Car Rear View Monitor
Feature:
1.Easy to install and use
2.High resolution display
3.Low power consumption
4.Supports screen rotatable
5.Stick on your car firmly and stablely
6.No audio and input or output
7.Full color LED backlight display
8.4.3” LED Backlight Color TFT LCD monitor
9.It helps to avoid incidents and accidents abrasion well
10.Support Car DVD, VCD, GPS, camera, STB, satellite receiver, and other video equipment
11.Park rear view priority: The monitor will start up automatically, and synchronous display
the video from rear view camera when you are backing your car, the monitor will close itself after backing
Specification:
Item 2: Car Rear View Camera
Feature:
1. Anti fog glass.
2. CMOS imaging sensor.
3. Support NTSC video system.
4. Embedded mounting in rear bumper.
5. Snap-in design, it is easy to install.
6. High sensitivity and low power consumption.
7. High-definition and 120 degree wide viewing angle.
8. Water-proof, shock-proof and anti-jamming functions.
9. It helps to avoid incidents and accidents abrasion well.
10. Its simple and modest design and small size won't draw any attention.
11. This camera can give you a full sight of the back of your car when you are driving.
12. To protect your car from collision with invisible obstacle, choose a high definition and good quality camera as ours.
13. Perfect solution to get rid of that poor rear view visibility on your car, boat, trailer, camper, truck or any vehicle
hat has no rear-view mirror or poor rear vision.
14. Connect to any type of monitor with a composite yellow RCA jack for crystal clear resolution mounted
inside will fit into most vehicle key holes, no other installation needed.
Specification:
Notice:
The product would come without three button on the back side.
Installation:
1.Mount the camera inside the keyhole of your vehicle.
2.Adjust the lens of the camera to its best position.
3.Voltage can not exceed 11v.
4.Connect the video output of the camera to the display in your vehicle.
Package Included:
Item 1: Car Rear View Monitor
Feature:
1.Easy to install and use
2.High resolution display
3.Low power consumption
4.Supports screen rotatable
5.Stick on your car firmly and stablely
6.No audio and input or output
7.Full color LED backlight display
8.4.3” LED Backlight Color TFT LCD monitor
9.It helps to avoid incidents and accidents abrasion well
10.Support Car DVD, VCD, GPS, camera, STB, satellite receiver, and other video equipment
11.Park rear view priority: The monitor will start up automatically, and synchronous display
the video from rear view camera when you are backing your car, the monitor will close itself after backing
Specification:
| Color | Black |
| Aspect Ration | 4:3 |
| Screen size | 4.3 inch |
| Resolution | 480x272 |
| Power supply | DC 9V-36V |
| Housing Material | ABS |
| Video input | One way video input |
| Display Component | Color TFT LCD |
Item 2: Car Rear View Camera
Feature:
1. Anti fog glass.
2. CMOS imaging sensor.
3. Support NTSC video system.
4. Embedded mounting in rear bumper.
5. Snap-in design, it is easy to install.
6. High sensitivity and low power consumption.
7. High-definition and 120 degree wide viewing angle.
8. Water-proof, shock-proof and anti-jamming functions.
9. It helps to avoid incidents and accidents abrasion well.
10. Its simple and modest design and small size won't draw any attention.
11. This camera can give you a full sight of the back of your car when you are driving.
12. To protect your car from collision with invisible obstacle, choose a high definition and good quality camera as ours.
13. Perfect solution to get rid of that poor rear view visibility on your car, boat, trailer, camper, truck or any vehicle
hat has no rear-view mirror or poor rear vision.
14. Connect to any type of monitor with a composite yellow RCA jack for crystal clear resolution mounted
inside will fit into most vehicle key holes, no other installation needed.
Specification:
| Lens | 2.0cm |
| Color | Black |
| TV System | NTSC |
| S/N Ratio | >48dB |
| Water-proof | IP66 |
| Power | DC 12V±10% |
| White Balance | Auto |
| Camera Size | 22*21mm |
| Sync. System | Internal |
| Video Cable Length | 6.0m |
| Video Output | 1.0Vpp, 75Ohm |
| Length Angle | 120 degree |
| Cable Length of Camera | 59cm |
| Scanning System | 2:1 Interlace |
| Power Supply Cable Length | 41cm |
| Image Reverse | Left-right mirror |
| High grade of waterproofing | IP66 |
| Horizontal Resolution | 420 TV lines |
| Effective Pixels | NTSC: 510(H) * 492(V) |
| Current Consumption | No More Than 300mA |
| Image Sensor | CMOS 1/4 MT9V125 or PC1030, color |
| Minimum Illumination | 0.2 Lux/ F1.8(0 Lux with LED) |
| Storage Temperature | -30℃ to + 60°C, 95% RH maximum |
| Operating Temperature | -20℃ to + 60°C, 95% RH maximum |
| Electronic Shutter | 1/50 to 1/100,000 seconds, 1/60 to 1/100,000 seconds |
Notice:
The product would come without three button on the back side.
Installation:
1.Mount the camera inside the keyhole of your vehicle.
2.Adjust the lens of the camera to its best position.
3.Voltage can not exceed 11v.
4.Connect the video output of the camera to the display in your vehicle.
Package Included:
| 1 X Video Cable | 1 X Power Cable |
| 1 X Installation of Visual Reversing | 1 X Car Rear View Camera |
| 2 X Screws |
