Description:
1. Comfort grip T-Handle glue puller tool.
2. With 18pcs of different shape puller taps.
3. Using of high quality metal material.
4. Excellent for large dents.
5. Works great on smaller door dings & hail damage.
Specification:
Instrument:
1. Clean the dent with a clean wet cloth.
2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun,
connect the power source and preheat for 5 minutes.
3. Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the
drawing gasket is, the larger the drawing force is).
4. Pull the trigger and apply the drawing gasket with extruded glue.
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue
cures and adheres.
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod
backwards to pull up the dent.
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen.
8. Clean the repaired place with a clean wet cloth.
Package included:
1 X T-handle Dent Puller
1. Comfort grip T-Handle glue puller tool.
2. With 18pcs of different shape puller taps.
3. Using of high quality metal material.
4. Excellent for large dents.
5. Works great on smaller door dings & hail damage.
Specification:
| Item | Dent Repair Tool |
| Material | Metal |
| Color | Red |
| Puller Size(LxH) | 10x9.5cm |
| Puller Diameter | 2cm |
| Quantity | 19pcs/set |
| Weight | 160g |
Instrument:
1. Clean the dent with a clean wet cloth.
2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun,
connect the power source and preheat for 5 minutes.
3. Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the
drawing gasket is, the larger the drawing force is).
4. Pull the trigger and apply the drawing gasket with extruded glue.
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue
cures and adheres.
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod
backwards to pull up the dent.
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen.
8. Clean the repaired place with a clean wet cloth.
Package included:
1 X T-handle Dent Puller
