We are an authorized Castle Creations Retail Store.
Come to us for all your Castle Creations products, parts, and accessories. If you need it, we can get it. Contact us... we can beat any price.
FAST Shipping.
CSE010-0155-05
Mamba X 25.2V Waterproof ESC & 1515-2200 KV Sensored Motor, E-Buggy Combo
This combo is a Mamba X ESC and 1515 1Y 2200kv motor for lighter 1/8th scale applications. Normally this motor is paired with our 1/8th scale Mamba Monster X ESC; but if you need to save some weight or need a smaller footprint, the Mamba X is more than capable of running this motor. This setup is recommended for 3s or 4s use in a vehicle weighing less than ~9lbs and geared for no more than ~45 MPH. If you have a heavier vehicle, looking for more speed or just want to beat the ever-loving snot out of your vehicle we would recommend picking up the Mamba Monster X combo
Includes:
1x Mamba X 25.2V Waterproof ESC
1x 1515-2200Kv Sensored Motor
Requires:
Battery Connector
Notes:
Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.
The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.
FEATURES
ESC Features:
- Wide 2S to 6S input voltage range (3-4S LiPo MAX with 1515-2200KV MOTOR)
- Sensored Motor Support (Castle X-Series Sensor Harness Included)
- Waterproof
- 8A Adjustable BEC (5.25V-8.0V)
- Data-logging
- Rugged CNC Aluminum Case
- Castle Link Programming Support
- SmartSense™
- Integrated Capacitors
- Removable 30mm Cooling Fan
- Integrated 4mm Bullet Connectors
- 12 AWG Power Wires
- Waterproof Switch
- Audible Alerts
Motor Features:
- 4-POLE 12-SLOT Rebuildable Design
- QUIETSENSE™ Technology
- ROAR Standard Sensor Port and Labeled Connections
- High-Performance 0.2 mm Steel Lamination Stacked Stator
- High-Strength Kevlar Wrap
- High-Strength, 180° C Grade, Neodymium Sintered Magnets
- Oversized, Low-Resistance, Gold-Plated Solder Tabs
- Oversized NMB Bearings
- M3 and M4 @ 25mm Mounting Hole
- 4mm male Castle Bullet Connectors
- 210mm length Sensor Wire
- Optional cooling fan coming soon
- Silicone coated sensor board
SPECS
ESC Specs:
Input Voltage Range: MIN: 2S LiPo MAX: 6S LiPo (25.2V) (Max 4s with included motor)
BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Operating Environment: Waterproof* design allows for use in nearly any environment.
Brake: Proportional
Reversible: Yes, but may be disabled for racing.
Length: 2.14" (54.4mm)
Width: 1.39" (35.2mm)
Height: 1.18" (30.0mm)
Weight (with wires): 3.56 oz. (101g)
Connectors: 4.0mm female bullets for motor connection.
Application Guidelines: Intended for up to 4s (25.2 Volt) operation in vehicles weighing less than 9bs/4kg with 1515 - 2200kv motor. SW VS. 1.82 ROAR APPROVED
Max. Recommended Vehicle Weight: Less than 9bs/4kg, with batteries, ready-to-run.
Motor Specs:
Input Voltage Range: 3-6S LiPo; 4s maximum with Mamba X ESC
Kv: 2200
Max. RPM: 60,000
Length: 75.4mm
Diameter: 40mm (41.4mm with fins)
Weight (with wires): 429g / 15.1oz
Shaft Length: 20mm
Shaft Diameter: 5mm
Mounting Hole Specifications: M3 and M4 @ 25mm
Connectors: 4mm male Castle Bullet Connectors on 12AWG wire, includes 210mm length sensor wire.
