The latest version Adding features :Support for multiple voltage DC output when 5V input
Module size: about 25 * 48mm (W * L)
Output current: 2 ~ 20mA. ( if you want to add current, pls put insurance below the transformer replaced the 0-ohm resistor, maximum 50mA, but does not recommend increased.)
When the input voltage is 5V, the output voltage can be adjusted in 280 ~ 1200V.
When the input voltage is 6 ~ 12V, the output voltage can be adjusted in 400 ~ 1200V.
The capacitor can be charged, but charging speed is somewhat slow, please note.
As the module power output module, it is not possible for the sensor.
Corresponding Products Description: This module is used on security products, stability is fairly good
This module with AC output, the output about AC 75V, but can't be adjusted,
Product test pattern:
Please refer to the main map, New products output are generally stable, of course, if you test the output voltage is unstable, you can add a limiting current resistor for testing, usually this problem does not occur.
When adjust the output recommended add a rectifier resistance like the following picture
Warm Reminder: This product is supported by the housing (3D print shell PLA, full-toxic configuration, print a housing needs of one hour long), if you need, please you tell me , and add more 3EUR to me,
Package Include:
1x New High Voltage 1000V Converter Step Up Boost Module Adjustable Power PSU Module Board
