Description:
Drillpro Upgrade 6th 12 Inch Free-installation Chainsaw Bracket For 100 125 150 Angle Grinder Woodworking Chain Saw
Specification:
Brand: Drillpro
Brand: Drillpro
Guide Bar Material: Spring steel
Chain Material: High Carbon Steel
Chiansaw: 12 inch
Rated Voltage: 220V
Rated Input Power: 800W
Chiansaw speed: 8000
Length the cable: 1.2m
Drive Link Quantity: 45 sections
Drive Link Quantity: 45 sections
Rotation speed: 10000 rpm
Compatible For: M10/ M12/ M14
Compatible For: M10/ M12/ M14
Features:
- PnP Free installation, direct cover can be used, convenient and fast.
- PnP Free installation, direct cover can be used, convenient and fast.
- 12 inch chainsaw, suitable for more woodworking style.
- This chain saw bracket set fits for 100/125/150 angle grinder.
- Ergonomic handle which is very convenient and safer for carrying.
- Safety of sawing, effectively improve the efficiency of your work.
Installation:
1.Remove the two press-plates of the angle grinder.
2.Place the sli rin.
3.Install the corresponding block into the output shaft .
4.Insert the connection block into the output shaft.
5.Install the bracket, remember to tghten to tighten the bracket.
6.Install the baffle, install the 8x30 screw, and tightenit with hexagon socket.
7.Install the handle and push the handle up and down into the aluminum bloack, and tighten with 8x14screws.
8.Cover with oil cover.
9.Open the small oil cover when working,and remember to tightly cover the oil when stopping.
NOTE: In order to prevent the chain from being damaged during transportation, we will loosen the chain. After receiving the product, please adjust the length of the chain by yourself.
NOTE: In order to prevent the chain from being damaged during transportation, we will loosen the chain. After receiving the product, please adjust the length of the chain by yourself.
Pacakge Included:
1 Set x Chain Saw Bracket(with chain)
1 Pc x Handle
1 Pc x Dam-board
1 Pc x Chain Saw Cover Block
1 Pc x Hexagon&cross Wrench
1 Pc x 8*30 Screw
2 Pc x 8*14 Screws
1 Pc x 10mm Nut
1 Pc x 12mm Nut
1 Pc x 14mm Nut
1 Pc x Rubber Ring
1 Pc x Oil Cover
1 Pc x Installation Instructions
(Angle Grinder Is NOT INCLUDED!!!)
1 Pc x Handle
1 Pc x Dam-board
1 Pc x Chain Saw Cover Block
1 Pc x Hexagon&cross Wrench
1 Pc x 8*30 Screw
2 Pc x 8*14 Screws
1 Pc x 10mm Nut
1 Pc x 12mm Nut
1 Pc x 14mm Nut
1 Pc x Rubber Ring
1 Pc x Oil Cover
1 Pc x Installation Instructions
(Angle Grinder Is NOT INCLUDED!!!)
More Details:
