Brand: Hayward
Features:
- Printed circuit board replacement
- Fits hayward stratum vacuum release system models vr1000, vr1000nt
- Weighs 2.6-pound
Details: This printed circuit board is designed to use with Hayward Stratum vacuum release system models VR1000, VR1000NT. Mark wires with respect to current location on circuit board. Remove tube at connection to solenoid valve by pushing in the ring around the outside of the tubing and gently pulling the tubing out of the fitting. Remove the wires from the green connector strip on the board. Save the jumper from the stop switch connections. Loosen the screws that hold the wires that go from the board to the contactor on the contactor. Loosen the ground screw retaining the green wire from the board to the box. Remove and save the six screws holding the board in the box. Carefully lift the board from the box. It is recommended that the 4mm tubing be replaced when the board is replaced. Carefully replace the board secure with the 6 screws and reconnect all the wires. Weighs 2.6-pound.
Package Dimensions: 12.9 x 9.5 x 6.6 inches
Languages: English
Binding: Lawn & Patio
