This Package includes: 1xMAD8108 EEE Heavy Lifting Multicopter Motor
ENTHUSIASTS EXTREME EDITION for extreme weight reduction while maintaining the highest possible performance.
- Open body design for better passive heat dissipation.
- Propeller installation compatibility.
- Reduced motor weight.
- Motor mounting holes standarization.
MAD8108 EEE QUADCOPTER MOTOR
The heavy-lift multi-rotor quadcopter engine. This motor was designed for endurance flight.
EXTREMELY REDUCED WEIGHT
- Airy case design
- Passive heat dissapation
- Lower power consumption & Maximized performance
HIGH VOLTAGE
- Designed for 6-12S voltage
- Increased torque
PROPELLER INSTALLATION COMPATIBILITY
multiple propeller mounting options
4 x M3 Ø12 mm
MOTOR SETUP COMPATIBILITY
- Mounting holes standardization
4 x M3 Ø30 mm
4 x M3 Ø25 mm
SPECIFICATION
| MAD8108 | EEE | EEE |
|---|---|---|
| Configuration | 36N42P | 36N42P |
| RPM/V | 100KV | 170KV |
| Stator Size | 81 x 8 mm | 81 x 8 mm |
| Motor Dimensions | 86.8 x 27.5 mm EEE | 86.8 x 27.5 mm EEE |
| Shaft Diameter | OD: 15 mm, ID: 13 mm | OD: 15 mm, ID: 13 mm |
| Continuous Power (60 mins) | 350 W | 600 W |
| Maximum Power (60 secs) | 750 W | 1300 W |
| Maximum Current (60 secs) | 24 A | 35 A |
| Idle Current at 16 V | 0.7 A | 1.4 A |
| Internal Resistance | 186 mΩ | 89 mΩ |
| Heat Dissipation | Passive | Passive |
| Rotor Balanced | Yes | Yes |
| Heavy Duty Design | No | No |
| Degree of Protection | Rainproof | Rainproof |
| Motor Weight | 250 g | 250 g |
| Product Boxed Weight | 525 g | 525 g |
| Maximum Thrust | 2000 g (6S) - 3300 g (12S) | 3800 g (6S) - 6800 g (12S) |
| Efficiency at 1500g Thrust | 17.0 g/W | 15.0 g/W |
| Propeller Mounting Holes | 4 x M3 Ø25 mm, 8 x M3 Ø35 mm | 4 x M3 Ø25 mm, 8 x M3 Ø35 mm |
| Motor Mounting Holes | 4 x M3 Ø30 mm, 4 x M4 Ø32 mm | 4 x M3 Ø30 mm, 4 x M4 Ø32 mm |
| Wire | Winding Extended 150 mm | Winding Extended 150 mm |
| Propeller Adapter | 2 pcs | 2 pcs |
| Additional Accessories | 3x Bullet Connector Set | |
| 3x Heat Shrink Tubes | ||
| 2x M3 10mm | ||
| 2x Carbon Prop Cover | ||
| 1x MAD Stickers | ||
| 1x Black Foam with Hole |
RECOMMENDATIONS
| 100KV | Propeller size | 27" - 34" 6S | Takeoff Weight 700 - 1500 g/rotor |
| Propeller size | 18" - 22" 12S | Takeoff Weight 1300 - 2000 g/rotor | |
| 170KV | Propeller size | 27" - 29" 6S | Takeoff Weight 1500 - 3000 g/rotor |
| Propeller size | 20" - 22" 12S | Takeoff Weight 2000 - 3500 g/rotor |
