Unlike any of the other trimmers, Speedee Trim's custom angled teeth at the blade tip allow you to get into the tight spots on your plants removing only what you want to take off while leaving the surrounding foliage intact providing you with a finished trim identical to that of scissors. Also, the main body of the blade can be used for volume trimming the sides of the flower in a fraction of the time. No other automated trimmer on the market at any price has the versatility and multiple manicuring functions as the Speedee Trim.
What's Included?
- One Corded Motor
- One Blade of Choice
- One Blade Scrubber Box
Trimmer Specs
- Power: 120V AC, 60Hz .04 AMPS
- Weight: 1.06 lbs.
- Cord length: 7 ft
Instructions for Speedee Trim Use:
Trim flowers with the stem pointed either toward or away from you so that the flat part of the leaves catch in between the teeth. Move the blade in a sweeping motion across the plant going around the stem. The amount of material removed is determined by how close the blade is held to the flower and the angle of the blade in relation to the stem. The closer the blade is angled toward the stem, the more material you will remove and vice versa. Spot trimming can be done by angling the teeth at the blade tip so that it's only the tip contacting the plant. Small precision cuts can be made by this action without touching the surrounding flower.
Cleaning Trimmer Blades in Scrubber Box:
Clean blades by filling cleaner box 3/4 capacity with isopropyl alcohol. Dip blades in box with repeating up and down motion. NEVER SCRAPE THE BLADES WITH ANYTHING METALIC AS THIS CAN DAMAGE THEM! Be careful not to drop or bend the blades as this can throw the alignment off.
Blade Options:
Buttlerfly Blade *BEST SELLER*
Dual-sided blade allows for multi-directional high volume manicuring. Forward angled teeth are specifically engineered to maneuver around tight spots giving you full control of what you take off and leave on your plants. This blade is best utilized on large densely grown freshly cut wet flowers.
- Best Use: The Butterfly is best suited for volume manicuring of densely grown freshly cut wet flowers.
- Tooth Section length: 2 5/16"
P2 Blade
Primarily for dry trimming, the P2 was designed as an enhancement of the Piranha blade providing for 3 separate cutting functions. Slightly thicker blade for increased durability and longer teeth with wider spacing for better reach make it more effective and versatile than the previous version.
The concave tooth configuration from the base allows for more effective volume trimming as it syncs to the natural contour of the flower.
Longer teeth at the tip allow for increased precision when spot trimming just as scissors would do. Additionally, the gap between the base teeth and the tip allow for small stem cutting up to about 1/8".
- Best Use: Fine detail manicuring of dry to semi dry flowers.
- Tooth Section length: 1 7/8”
Sabertooth Blade
Thin wide spaced teeth are slanted forward with a tapered tip allow for spot-on precision manicuring of freshly cut wet plants. The custom teeth allow the user to remove very small amounts of material without touching the surrounding foliage. The main body of the blade can be used for volume trimming the entire circumference of the flower.
- Best Use: The long thin teeth and wide spacing make this blade ideal for manicuring freshly cut wet flowers.
- Tooth Section length: 2 7/8”
Piranha Blade
Shorter blade length for optimal control. Thinner blades for cleaner cuts also facilitate the ability to get into even tighter places than any of the other models. Custom forward angled tip allow the user to manicure with near surgical precision. Smaller micro edge teeth make this blade ideal for manicuring dried flowers.
- Best Use: Having the smallest teeth and a short thin blade, the Piranha is perfectly designed for manicuring dried flowers.
- Tooth Section length: 1 3/4”
Hammerhead Blade
Dual sided with the widest spacing between the teeth out of all the other blades. This blade is best utilized for de-leafing and pruning overgrown plants during mid-cycle. Best paired with the cordless motor for easy maneuverability around the grow site.
- Best Use: The Hammerhead is strictly a pruning/de-leafing blade for cleaning up the crop during mid-cycle. This blade is best paired with the cordless motor for maneuverability.
- Tooth Section length: 2 1/4”
